T-REX 700E F3C V3 Super Combo RH70E08XW

T-REX 700E F3C V3 Super Combo RH70E08XW R/C Helicopter

Specification(T-REX 700E F3C V3) :

1. Brand new all metal high precision and high rigidity main blade assembly, providing 3 positive/negative deltas andnumerous Bell & Hiller mixing ratios.
2. F3C and beginner pilots will benefit from the head’s higher control resolution as well as stability level, satisfying the need of both highly stable static categories as well as precision aerobatic categories.
3. Innovative sliding battery tray rails imbedded into the 3K side frames, with patented spring loaded latching mechanism, allowing for quick battery access as well as battery protection.
4. Top mounted motor base bringing the motor's center of gravity closer to rotating disc,allowing blade drafts to cool the motor effectively.
5. Motor mount consists of third bearing block to provide motor shaft support, effectively reduce torque induced shifts, and minimize gear striping issue.
6. Utilizes highest spec CNC modue-1 helical main gear, with highest load tolerance and lowest noise.
7. Top mounted ESC platform to take advantage of main blades airflow for effective cooling.
8. New lightweight H-shaped electric device retention system for protection, as well as ergonomically correct design to simplify operation.
9. Brand new tail gear box, with aesthetically pleasing material and improved maintenance.
10. Total pitch range of +13~-13 degrees,for the ultimate explosive power.
11. High torque rated one way bearing base.
12. High precision bearing supported dual push point rudder control design.
13. High speed rated thrust bearings incorporated into tail blade grips.
14. Dual 3K carbon plate side frame design for ease of maintenance and resistance to torque induced flex.
15. New lightweight landing gears.
16. High quality painted fiberglass canopy with 4-point quick release mounts.

Users must have a certain concept of security to operate the R/C helicopters.

Be sure to read and comply with related safety notes of instruction manual before flying. 

T-REX 700 E F3C V3 Product:

Focus Shot 1(Newly designed main rotor head assembly)

Focus Shot 2 (Innovative sliding battery tray with patented springloaded lacthing mechanism) 

Focus Shot 3(6061-T6 Aluminum alloy material and CNC processed metal battery mount)

Focus Shot 4 (Utilizes highest spec CNC Modue-1 helical main gear) 

Focus Shot 5 (Precision CNC machined aluminum pieces including elevator servo mount)

Focus Shot 6 (Precision CNC machined aluminum pieces including rudderr servo mount)

Focus Shot 7 (New carbon tail control pushrod assembly)

Focus Shot 8 (High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision)

Focus Shot 9 (Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage)

Focus Shot10(750MX(450KV) high efficiency, high torque brushless motor) 

Focus Shot 11 (F3C 700mm carbon main blades)

Focus Shot 12 (DS615 digital servos with CNC aluminum servo horns)

Focus Shot 13 (DS655 Digital servo) 

Focus Shot 14 (GP900 Head Lock Gyro) 

Focus Shot 15 (Castle ICE2 HV 120 Brushless ESC)

Focus Shot 16 (6A External BEC w/ 5.1V Two-way Step-down voltage regulator)    

Specification(GP900 Head lock gyro combo) :

1. Utilizes MEMS(Micro Electro Mechanical Systems) micro electronic sensors which are small, highly reliable, and highly stable.
2. 16bit high processing speed CPU is used for ultra high resolution, resulting in higher rudder precision than previously possible, even on modern high powered helicopters.
3. Supports Spektrum and JR satellites, traditional receiver not needed.
4. Support Futabs S-BUS system.
5. Support both digital and analog servos.
6. Support both wide and narrow band receivers.
7. Integrated RCE-G600 speed governor function, thus GP900 can provide speed governor function without additional electronics.
8. Suitable for all 200 to 700 size glow engine or electric helicopters, with higher vibration resistance than any other systems. Superior performance is achievable even with harder mounting foam tapes.
9. Support parameter setting through PC interface, as well as firmware updates.
10. Anti-torque compensation. Optimal tail locking achievable no matter if gyro is mounted upright or inverted. 

Specification(GP900 Head lock gyro combo) :

• Operating Voltage:DC 3.5~8.4V
• Current Consumption:<80mA @ 4.8V
• Angular Detection Speed:600 degrees/sec
• Operating Humidity:-20℃~65℃
• RoHS certification.
• Operating Humidity:0%~95%
• Size:36.5x25.2x15.6mm
• Weight:11g

Specification(T-REX 700E F3C V3) :

• Length: 1343mm
• Height: 424mm
• Width: 210mm
• Main Blade Length: 700mm
• Main Rotor Diameter: 1582mm
• Tail Rotor Diameter: 281mm
• Motor Drive Gear:12T
• Main Drive Gear:112T
• Autorotation Tail Drive Gear: 104T
• Tail Drive Gear: 24T
• Drive Gear Ratio: 1:9.33:4.33
• Weight(With Motor): 3230g
• Flying Weight: Approx. 5200g

T-REX 700E F3C V3 Accessories:

• T-REX 700E F3C Kits Set X1
• Aluminum Tail Boom X1
• 3K Carbon Fiber Tail Boom X1
• F3C 700mm Carbon fiber blades X1
• DS615 Digital servo X3 set
• DS655 Digital servo X1
• GP900 Head Lock Gyro X1
• 750MX Brushless Motor (450KV) X1
• Castle ICE2 HV 120 Brushless ESC X1
• 6A External BEC w/ 5.1V Two-way Step-down voltage regulator X1
• 105mm 3K Carbon Fiber Tail Blades X1 Set

Radio transmitter and electronic equipment required for assembly:

• Transmitter (7-channel or more, helicopter system)
• Receiver (7-channel or more)
• 6S Li-Po 4500 ~ 5200mAh X2
• Dial Pitch Gauge